Electric Car Battery
OPzS 2V1000AH Flooded Tubular Electric Car/ Traction Forklifts Battery OPzS series battery belong to flooded tubular traction forklifts, electric car, traction electric vehicles, photovoltaic, wind energy etc...and opzs battery adopts flooded tubular technology, offer 2200 cycles desigh life in...
OPzS 2V1000AH Flooded Tubular Electric Car Battery
OPzS series battery belong to flooded tubular traction forklifts, electric car, traction electric vehicles, photovoltaic, wind energy etc...and opzs battery adopts flooded tubular technology, offer 2200 cycles desigh life in 80%DOD at 25℃.
Main Parameters of Electric Car Battery
Product Specification of Electric Car Battery
|Voltage Per Unit||2V|
|Capacity||1000Ah@10hr-rate to 1.85V per cell @25℃|
|Approx Weight||Without Electrolyte 57.8 kg With Electrolyte 78.0kg|
|Max. Discharge Current||3800 A (5 sec)|
|Internal Resistance||Approx. 0.28 mΩ|
|Operating Temperature Range||Discharge: -15℃ ~ 50℃|
Charge: 0℃ ~ 40℃
Storage: -15℃ ~ 50℃
|Optimal Operating Temperature Range||25℃ ± 5℃|
|Float charging Voltage||2.23 to 2.25V(DC)/cell at 25℃|
|Maximum Charging Current||125A|
|Cycle Service||2.40 to 2.45 V(DC)/cell at 25℃|
|Self Discharge||Self-discharge rate less than 3.5% per month|
at 25℃. Please charge batteries before using.
|Terminal||Thread insert & Bolt (F10-M8)|
|Container Material||A.S. (UL94-HB), and UL94-V0 is optiona|
Product Datasheet of Electric Car Battery
General Features of Electric Car Battery
· Capacity range: 100Ah-3000Ah
· Low self-discharge rate: ≤2%/month
· Cycle life: 100% DOD 1800times ; 80% DOD 2200times; 50% DOD 3700times; 30% DOD 5800times
· High charge acceptance performance
· Widen operation temperature rang:- 40ºC ~ 70ºC
· Electrolyte: Gel electrolyte used import Nano-fumed Silica special technics make it in a gel · immobilized state, more safe than AGM type, special additives makes it more stable, lower internal resistance
· Grid: made of rare earth alloy with patented formula, thicker and anti-corrosion, ensure stronger ability to recover from deep discharging
· Positive Plate: tubular type with die-casting, use quaternary alloy (Pb-Ca-Sn-Al), good corrosion resistance and long service life.
· Negative plate: improved high-density lead paste with patented design
· Separator: PVC-SiO2 separator imported from German, low internal resistance, high pore rate and long life
· Safety valve: good sensitivity, safe and reliable, equipped with flame arrester/acid filter
· Battery case: made of high strengh PP and durable design
· Voltage class: 2V
Processing & Packing
Security system Solar system
Electric Car Light supply power
1. Don't near the hot source and don't under the sunshine.
2. Don't charge in the sealed container.
3. Ambient temperature is important factor for the battery operation. When the ambient temperature is too high, Battery plate corrosion will be increased, while absorbing more moisture; When the ambient temperature is too low, the battery will not be full charged. All this will affect the battery life. Therefore we suggest the working ambient temperature is around 25 º C.
5. After the battery is full converted to float charging, the float voltage is around 13.0V. If the charging voltage is too high will cause the battery overcharge, otherwise the battery will not be full charged. Charging voltage is abnormal, it may be caused by the battery configuration error, or it may be caused by controller failure. Do not choose the controller with bad quality.
6. No short circuit. It should be addition charge if you don't use, and single charge per three months, to avoid irreversible sulfating. The battery should be changed when the battery jar broken or the electrolyte omitted, to avoid acid corrosion.
7. Don't store in the space of acid gas.
8. You should be careful and regular check when use the battery. To avoid the battery don't work. You should change the battery if the capacity is not full or has been damage, especially after one year using.
Tel/ Wechat: +86 17854275721
Whatsapp/ Skype: +86 17854275721