Sealed Type Lead Acid Battery
CA Series (Valve Regulated sealed lead acid AGM battery) CA series battery is Valve-controlled maintenance-free deep cycle batteries are speical supporting products for solar power systems, wind power generation systems, uninterruptible power supplies, inverters, EPS,etc.
CA Series (Valve Regulated sealed lead acid AGM battery)
CA series battery is Valve-controlled maintenance-free deep cycle batteries are speical supporting products for solar power systems, wind power generation systems, uninterruptible power supplies, inverters, EPS,etc.
Long-life design (25℃): 10 or 18 years
Low self-discharge rate: ≤3%/Month
Good high rate discharge performance
High sealed reaction efficiency: ≥99%
Wide operation temperature range: -20℃～60℃
Grid: thicker grid and radiative grid structure
Structure: Compact design, lower internal resistance/high specific energy
Cells Per Unit: 6
Voltage Per Unit: 12
Capacity: 55Ah@10hr-rate to 1.80V per cell @25℃
Weight: Approx. 18.0Kg(Tolerance±3%)
Max. Discharge Current: 550A (5 sec)
Internal Resistance: Approx. 6 mΩ
Normal Operating Temperature Range: 25℃±5℃
Float charging Voltage: 13.6 to 13.8 VDC/unit Average at 25℃
Recommended Maximum Charging Current: 16.5A
Equalization and Cycle Service: 14.6 to 14.8 VDC/unit Average at 25℃
Self Discharge: CHENGYU Valve Regulated Lead Acid (VRLA) batteries can be stored for more than 6 months at 25℃. Self-discharge ratio less than 3% per month at 25℃. Please charge batteries before using.
Terminal: Terminal F11/F15
Container Material: A.B.S. UL94-HB, UL94-V0 Optional.
UPS, Broadband, Electric powered vehicles, Electric powered toys, Vacuum cleaners, Medical Equipments, Goof cars and buggies, Wheel chairs, PVs, solar systems, control systems, power systems, wind energy systems, telecommunication /communication systems & etc.
Storage and installation
1.Fortune Power battery is not in use should remove the cable, pole jacket cover and wipe clean;
2.once every three months for Fortune Power battery to maintain charging, constant voltage charging method for limiting law, the initial charging current is 0.1CA, the charging voltage is 2.4V / single cell (25 ℃ when);
3.Fortune Power battery should be stored in dry and ventilated place, away from direct sunlight and away from heat sources;
4.when handling batteries even force, the force of the housing portion of the battery to avoid damage to the pole;
5.the installation should use insulated tools to prevent click.
Zhongneng Chengyu Power Co., Ltd mainly produce AGM, Start and Motive Power types, including AGM VRLA battery, Gel battery, UPS High Rate batteries, OPzV, OPzS, automotive battery, motorcycle battery, golf cart battery, electric vehicle battery.
We have a strong engineer team and you are welcome to contact us for technical support at anytime.
We also have good relationship with some leading shipping companies and forwarders.
We will offer you fast delivery service and one-stop solution for Battery.
We work with many battery accessories manufacturers, such as battery rack, battery tray and cabinet, and chargers.
So if you need any of these accessories, just feel free to let us know.
We provied technical support,OEM and ODM service.
All of our technical engenieers have over 10 year experiences in this field.
All of our products have passed CE and RoHS certificated, lift-time technical support.
We have specialised after-sale service department.
Chengyu Maintenance-free lead-acid battery
• Ultra-heavy grid design
The positive grid thickness reaches 6.8 mm, and the corrosion life is 20 years.
• Lead and calcium multi-component high purity alloy
It does not generate pollution to the environment and surrounding facilities, and minimizes the self-discharge and water loss of battery arising from the material formulation.
• Elongation design of polar plate
The elongation space of polar plate is reserved to prevent early failure of the battery due to elongation of the polar plate.
• Adding the polar plate protective sleeve
It prevents top or bottom short circuit of the battery to improve the battery system reliability.
• Flame retardant design
The whole system adopts fame retardant design to eliminate the hazards of battery combustion and explosion.
• Double-layer acid filtering explosion-proof safety valve
The safety valve shows the explosion-proof and acid filtering sealing performance, and the valve opening pressure is 10-20 KPa.
• Heat dissipation design
The high strength thin wall PP shell + steel frame design is adopted so that heat in the battery can quickly spread to the steel frame. The special cooling channel on the steel frame can quickly transfer heat to the outside and effectively prevent thermal runaway of the system.
• Flexible installation modes
Batteries can be placed vertically or horizontally, installed in multiple layers and multiple columns like building blocks, or installed in the cabinet type.
Shipping and Packing
1.Each battery lay in its own carton
2.Cartons stand on the 1M*1M pallet and protected by the waterproof plastic film.
3. Shipping way: Sea shipment, fast, cheap and safe.
2017 international photoavoltaic power generational conference & exhibition at Shanghai, China.
How to choose good battery?
There are several factors that should be taken into account when determining
the total cost of ownership over the life of the battery.
1.Price: A battery with a low price is always attractive, but if low price comes
at the expense of quality and battery life, the need for frequent battery replacements
could boost the cost over time. That’s why it’s important to consider issues other than
price when making the decision.
2.Capacity: Battery capacity is important because it’s a measure of the amount of energy
stored in the battery.
3.Voltage: The battery bank voltage must be considered to ensure it matches the system requirements. The battery bank voltage is often determined by the inverter specifications
if installing a DC-to-AC system or by the voltage of the loads in a DC system.
4.Cycle Life: The most critical consideration is cycle life, which provides the number of discharge/charge cycles the battery can provide before capacity drops to a specified
percentage of rated capacity. Batteries from different manufacturers may have the same
capacity and energy content and be similar in weight. But design, materials, process and
quality influence how long the battery will cycle.
Q1. Can I have a sample order for solar battery?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 2-5 weeks for order quantity more than
Q3. How do you ship the goods and how long does it take to arrive?
A: Shipping by sea.
Q4. How to proceed an order for solar battery?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q5. Is it OK to print my logo on solar battery product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 3 years warranty to our products.
Company: Zhongneng Chengyu Power Co., Ltd