12v Deep Cycle AGM Solar Battery
DC series is specially designed for frequent cyclic performance. By using strong grids and specially designed active material, the DC series battery offers more cyclic life than standby series .
12v Deep Cycle AGM Solar Battery differ from flooded lead acid batteries in that the electrolyte is held in the glass mats, as opposed to freely flooding the plates. Very thin glass fibers are woven into a mat to increase surface area enough to hold sufficient electrolyte on the cells for their lifetime. The fibers that compose the fine glass mat do not absorb nor are they affected by the acidic electrolyte.
Cells Per Unit: 6
Voltage Per Unit: 12
Capacity: 260Ah@10hr-rate to 1.80V per cell @25℃
Dimension(LxWxH): 520 x 268 x 220mm
Weight: Approx. 74.0Kg(Tolerance ± 1.5%)
Max. Discharge Current: 2600 A (5 sec)
Internal Resistance: Approx. 3.5 mΩ
Normal Operating Temperature Range: 25℃±5℃
Float charging Voltage: 13.6 to 13.8 VDC/unit Average at 25℃
Recommended Maximum Charging Current: 78A
Equalization and Cycle Service: 14.6 to 14.8 VDC/unit Average at 25℃
Container Material: A.B.S. UL94-HB, UL94-V0 Optional.
Datasheet of 12v Deep Cycle AGM Solar Battery
1. Radial grid design, a tight assembly technology with excellent high efficiency discharge performance.
2. Deep cycle battery design, using 4BS lead paste technology, cycle use has long service life.
3. Unique grid alloys, special lead paste formulation and unique positive/negative lead paste formulations design, the battery with excellent deep cycle ability and excellent over-discharge resilience
4. All with high purity raw materials, battery self-discharge is minimal.
5. Using gas compounds technology, the battery has a high sealing reaction efficiency, no mist precipitation, safety and environmental protection, pollution-free.
6. With special design and high reliable sealing technology to ensure the battery sealing, safe, and reliable.
What material of our good battery?
Product Packing of 12v Deep Cycle AGM Solar Battery
Standard Export Carton with foam inside suitable for long-distant ocean shipment and tough handling. One battery, one carton packaging, covered with a layer of plastic film, custom wooden pallets, better protection of the battery to ensure that the transport process without any damage! Can according customer required packing and print logo.
1.The valve regulated sealed lead acid battery is maintenance free and without acid adding, any top cover opening is forbidden during use.
2.The battery should be charged once every 6 months after leaving the factory
3.Checking the battery appearance before using, and avoid strong vibration or mechanical damage.
4.Recommend recycling using temperature 5 °c ~35 °c , the battery is strictly prohibited get wet in the rain and soaking.
5.Battery installation and removal should be uniform stress, stress at the shell should be part of the battery, avoid damage the terminal.
6.If you need batteries in parallel, do not exceed three parallel.
7.The battery when used in multiple circuits, it must be according to battery marks "+", "-" in order of priority and space cannot be less than 15mm.
8.Before you connecting with device, make it disconnected, then connect the battery positive to the devices positive, negative connected to negative terminal, and fix the cable
9.Battery storage temperature should be between -20 °c to ~ 40 °c, and maintain ventilation. Keep away from the fire or heat, avoid direct sunlight.
Cleaning the battery with a damp cloth wrung, do not use a dry cloth and chemical cleaning agents.
10.Do not overhaul and decompose battery, it should be take care by professional guidance, or contact us immediately.
11.Do not mix up different brands and different batches battery.
12.Discharging once every 3 months is recommended if without any power off.
13.If battery capacity is less than 50% of full- rated capacity, or there is abnormal charging voltage and discharging characteristic, do replace it.
Why choose us?
1.High-tech content & Quality control
Neata enjoys high reputation by set up a complete system with a group of experienced technology engineers, strong R&D sources, integrate QC system and production management system, we do control the product quality and production efficiency very well.
We possess the following certificate CE, UL, ISO9001, ROHS Certification.
We mark code on each solar battery; so as long as you have any questions, we can check product production information. Customize a NPP special identity card number for each product.
3.High-efficient skillful staffs & Perfection salesman
We have an excellent team with over 10 years experiences on VRAL BATTERY and more than 200 skilled workers.
Each salesman has been trained about professional product knowledge to provide thoughtful and careful follow-up service for each customer order.
4.Economy & Environment
We dedicated to provide economy and environment friendly battery products and create a new widespread field for storage battery products with our customers by joint efforts.
1.Don’t near the hot source and don’t under the sunshine.
2.Don’t charge in the sealed container.
3.No short circuit. It should be addition charge if you don’t use, and single charge per three months, to avoid irreversible sulfating. The battery should be changed when the battery jar broken or the electrolyte omitted, to avoid acid corrosion.
4.Don’t store in the space of acid gas. You should be careful and regular check when use the battery. To avoid the battery don’t work. You should change the battery if the capacity is not full or has been damage, especially after one year using.