AGM Batteries
DC12-100 -Y (12v 100Ah) Chengyu batteries covered by the general AGM series(CA series), deep cycle series(DC series), Front access series(FR series), Gel series(dg series), mini lead acid battery (CS series), nominal voltage 2V, 6V, 12V rated capacity 1.3AH~3000AH. It is suitable for UPS, solar...
Product Details
AGM batteries differ from flooded lead acid batteries in that the electrolyte is held in the glass mats, as opposed to freely flooding the plates. Very thin glass fibers are woven into a mat to increase surface area enough to hold sufficient electrolyte on the cells for their lifetime. The fibers that compose the fine glass mat do not absorb nor are they affected by the acidic electrolyte. These mats are wrung out 2–5% after being soaked in acids, prior to manufacture completion and sealing.
AGM batteries present better self discharging characteristics than conventional batteries in different range of temperatures. As with lead-acid batteries to maximize the life of AGM battery is important to follow charging specifications and a voltage regulated charger is recommended.[8] and also there is a correlation between the depth of discharge (DOD) and the Cycle life of the battery, with differences between 500 and 1300 cycles depending on depth of discharge.
Specification of AGM Batteries
Cells Per Unit: 1
Voltage Per Unit: 2
Capacity: 1200Ah@10hr-rate to 1.80V per cell @25℃
Dimension(LxWxH): 475 x 174 x 368mm
Weight: Approx. 66.0Kg(Tolerance ± 1.5%)
Max. Discharge Current: 4800 A (5 sec)
Internal Resistance: Approx. 0.54 mΩ
Operating Temperature Range:
Discharge: -20℃ ~60℃;
Charge: 0℃~50℃;
Storage: -20℃~60℃
Normal Operating Temperature Range: 25℃ ± 5℃
Float charging Voltage: 2.27 to 2.3 VDC/unit Average at 25℃
Recommended Maximum Charging Current: 240A
Equalization and Cycle Service: 2.43 to 2.47 VDC/unit Average at 25℃
Self Discharge: CHENGYU Valve Regulated Lead Acid (VRLA) batteries can be stored for more than 6 months at 25℃. Self-discharge ratio less than 3% per month at 25℃. Please charge batteries before using.
Terminal: Thread insert & Bolt (F10)
Container Material: A.B.S. UL94-HB, UL94-V0 Optional.
Datasheet of AGM Batteries
DC series catalogue
| Model | Voltage | Capacity | Weight | Dimension(mm) | Terminal | Internal Resistance | Short Circuit Current |
| (V) | (Ah) | (Kg) | （LxWxH）(TH) | (MΩ@25℃)) | (A) | ||
| DC12-26-Y | 12 | 26 | 8.1 | 166x175x125(125) | D | 10.0 | 900 |
| DC12-28-Y | 12 | 28 | 8.6 | 166x175x125(125) | D | 9.0 | 950 |
| DC12-40-Y | 12 | 40 | 13 | 198x166x171(171) | D | 8.0 | 1000 |
| DC12-55-Y | 12 | 55 | 18 | 229x138x210(235) | C | 7.0 | 1100 |
| DC12-65-Y | 12 | 65 | 21 | 350x167x180(183) | C | 6.5 | 1500 |
| DC12-75-Y | 12 | 75 | 23.5 | 260x169x210(235) | C | 6.5 | 1720 |
| DC12-80-Y | 12 | 80 | 24 | 350x167x180(183) | C | 6.0 | 1840 |
| DC12-90-Y | 12 | 90 | 28.5 | 306x169x210(235) | C | 5.2 | 1940 |
| DC12-100-Y | 12 | 100 | 30 | 328x172x222(222) | C | 5.0 | 2100 |
| DC12-120-Y | 12 | 120 | 35 | 407x177x225(225) | C | 4.5 | 2220 |
| DC12-134-Y | 12 | 134 | 41.5 | 340x173x280(285) | C | 4.5 | 2480 |
| DC12-150-Y | 12 | 150 | 44.5 | 483x170x240(240) | C | 4.2 | 2780 |
| DC12-180-Y | 12 | 180 | 53 | 530x209x214(219) | E | 4.0 | 3330 |
| DC12-200-Y | 12 | 200 | 60 | 522x240x219(240) | E | 4.0 | 3700 |
| DC12-260-Y | 12 | 260 | 74 | 520x268x220(225) | E | 3.5 | 4810 |
| DC2-200-Y | 2 | 200 | 14 | 177x111x366(366) | G | 0.80 | 2650 |
| DC2-300-Y | 2 | 300 | 19 | 171x150x365(365) | G | 0.72 | 2910 |
| DC2-400-Y | 2 | 400 | 26 | 211x176x329(366) | H | 0.67 | 3400 |
| DC2-500-Y | 2 | 500 | 30.5 | 242x172x329(366) | H | 0.62 | 4210 |
| DC2-600-Y | 2 | 600 | 37 | 302x175x328(365) | H | 0.63 | 5080 |
| DC2-800-Y | 2 | 800 | 50 | 411x175x327(368) | J | 0.60 | 6370 |
| DC2-1000-Y | 2 | 1000 | 62 | 479x175x327(368) | J | 0.55 | 6850 |
Discharge Chemistry
In the discharged state, both the positive and negative plates become lead(II) sulfate (PbSO4). The electrolyte loses much of its dissolved sulfuric acid and becomes primarily water. The discharge process is driven by the conduction of electrons from the negative plate back into the cell at the positive plate in the external circuit.
Negative plate reaction: Pb(s) + HSO4–(aq) → PbSO4(s) + H+(aq) + 2e–
Positive plate reaction: PbO2(s) + HSO4–(aq) + 3H+(aq) + 2e– → PbSO4(s) + 2H2O(l)
Combining these two reactions, one can determine the overall reaction:
Pb(s) + PbO2(s) + 2H+(aq) + 2HSO4–(aq) → 2PbSO4(s) + 2H2O(l)
Our other products
FAQ
Q1: Payment term: T/T, D/P, Western Union
A1: 30% deposit in advance, 70% balance against the copy of B/L.We'll show you the photos of the products before you pay the balance.
Q2: If you want datasheet / catalog
A2: Please kindly send an inquiry to us, We will support you quite well.
Q3: Packing
Q3: Standard cartons for exporting, wood pallet for safe transportation.
Q4: What’s kinds of battery will you provide?
A4: We have VRLA Battery, UPS Battery, High Rate Battery, Deep Cycle Battery, Gel Battery, Solar Battery, Front Terminal Battery, OPzV Battery, OPzS Battery and etc.
Q5: Where can we use the batteries?
A5: Our batteries can be widely used in UPS, Solar and wind system, Control system, Telecommunication system, Emergency light system, Security system, Emergency lamp, Medical treatment equipment, Military equipment and etc.
Q6: How to maintain the battery?
A: The battery should be stored in clean, dry, ventilated, dark environment when not using, keep it after full charge, recharge it every 3 months or 5 months.
Q7: What is your garrantee time for VRLA battery?
A7: 1 year warranty for VRLA battery below 33AH and 2-5 years for battery above 33AH from shipping date.
Q8: May I have the samples?
A8: Yes. we will prepare the samples as your requirement.
Q9: How about your delivery time usually?
A9: 25 working days upon payment usually.
Contact me
Hot Tags
Previous: Lead Acid AGM Batteries Next: Tubular GEL Battery
Inquiry