CA Series (Valve Regulated sealed lead acid AGM battery) CA series is the general purpose battery with 10 years design life in float service. It meets IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the CA series battery maintains high consistency for better performance and reliable standby service life.It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.
Lead-acid Battery is the general purpose battery with 10 years design life in float service. It meets IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the CA series battery maintains high consistency for better performance and reliable standby service life.It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.
Long-life design (25℃): 10 or 18 years
Low self-discharge rate: ≤3%/Month
Good high rate discharge performance
High sealed reaction efficiency: ≥99%
Wide operation temperature range: -20℃～60℃
Grid: thicker grid and radiative grid structure
Structure: Compact design, lower internal resistance/high specific energy
Plate: Pasted flat type, with patent formula of AM/ latest grid alloy + patent formula of AM
Terminal: two or more types terminals are convenient for selection
Separator: using improved AGM separator, makes lower resistance, higher assembling pressure to increase cycle life
Specification of Lead-acid Battery
Cells Per Unit: 6
Voltage Per Unit: 12
Capacity: 60Ah@10hr-rate to 1.80V per cell @25℃
Weight: Approx. 20.5Kg(Tolerance±2%)
Max. Discharge Current: 600A (5 sec)
Internal Resistance: Approx. 6 mΩ
Operating Temperature Range:
Discharge: -20℃ ~60℃;
Normal Operating Temperature Range: 25℃±5℃
Float charging Voltage: 13.6 to 13.8 VDC/unit Average at 25℃
Recommended Maximum Charging Current: 18.0A
Equalization and Cycle Service: 14.6 to 14.8 VDC/unit Average at 25℃
Self Discharge: CHENGYU Valve Regulated Lead Acid (VRLA) batteries can be stored for more than 6 months at 25℃. Self-discharge ratio less than 3% per month at 25℃. Please charge batteries before using.
Terminal: Terminal F11/F15
Container Material: A.B.S. UL94-HB, UL94-V0 Optional.
Datasheet of Lead-acid Battery
-Solar system and Wind system
-Emergency lighting equipmen
-Fire alarm and security systems
-Electric equipment and telemeter equipment
-Wireless lawn movers vacuum cleaner and washing machine
-Toys and consumer electronics
-Portable power tools measuring and medical equipment Portable video
cameraportable personal computer
Light supply system
Process & QC
The battery electrolyte contains fumed silica, and there is no flow, no leakage or no gradation of acid liquor. The battery slot and cover is made of ABS materials through hot seal. There is no risk of leakage during the utilization and transportation, and it is safe and reliable.
The gel electrolyte is in dilute sol state when being injected. Excessive electrolyte can fill in all the space inside battery. Under circumstance of high-temperature and overcharge, the battery will not dry out. The gel battery has large heat capacity and good radiation performance. It is not easy to appear thermal runaway. The battery can work under severe environment.
The grid of electrode plate is in radial structure, which is favorable for improving the utilization rate of active materials. Pb-Ca-Sn-Al alloy makes the positive plate have a good performance of corrosion proof and makes the negative plate have a high over-voltage of hydrogen evolution. Unique lead paste formula enables perfect recovery performance of battery recharging after deep discharging.
The battery has strong cycle and duration performance, sufficient capacity and long life.
The terminal is in the structure of tin electrodeposited copper terminal, which is favorable for discharging battery with large current and is favorable for the reliability of connection between batteries. The terminal is sealed through fusion welding and second seal of resin sealant, and the seal reliability is high.